It sounds like a file was corrupted during installation or the source disk may have a corrupted file. First try to re-install the program from the source disk. If you are still receiving this error, go to our website and download and install the Full Update.
Yes, once you input the data, it is stored in the program. This data isn’t overwritten when new versions are installed. This way, you can stay current and you don’t need to re-key your data whenever you update.
From the AMS Payroll Menu, select Payer>Payer Edit>Check/MICR Info. In the upper right corner of the screen, enter the "Last Check Number". AND if the new check number is lower than a previous check number, remove the check from the "Update wi
Report L in AMS Payroll will print a report that lists the Overtime Hours and Overtime Pay, as well as Regular Hours and Regular Pay. From the AMS Payroll Menu, select Reports>Report L (Print Worksheet/PayDetail/WageDetail/WorkerComp), and then select the Printer Mode. On the Repor
The AMS Payroll software fully supports printing MICR encoded checks using a laser printer with magnetic toner. Simply go to the MICR (Payer>Payer Edit>Check/MICR) Info screen and complete the information.
This is really a function of the fax software that you have installed. That software will install a printer driver that actually sends a fax of the printed document instead of printing normally. The 1099-Etc software can print to this type of fax driver, but it has not been tested for
Each field on the check that the program prints can be moved up or down or right or left. On the Check/MICR screen (Payer>Payer Edit>Check/MICR) there is an Edit *.chk function that will allow you to adjust these settings. Once the check edit screen is op
try screen, select Print>Table Report (or Worksheet). On the Record Selection screen , which displays while printing either report, select Tagged Records. Selecting this will only include Tagged records on the reports.
To enable Duplex printing you will need to enter a Duplex Printer code in Printer Settings. Open the the W-2/1099 Forms Filer Menu and select a Client. Select Options> Printer Settings, and select the Printer Mode. On the Printer Device and Codes screen enter the Duplex Code
Once you select the Form to Print, a Printer Mode dialog box displays. On the Select Printer Mode screen select 2 (HP Laser Printer (pre-printed forms)and an Align button will display at the bottom of this screen. Click Align and follow the on-screen instructions.
Yes! To print a voucher, use Check Type X. To change your check type, click on Payer>Payer Edit>Preferences from the AMS Payroll Menu. In the "Checks and Vouchers" section, change the Check Type to "X".
Yes, you can print paychecks/paystubs to a PDF file. First, open the client in AMS Payroll, select Payer>Payer Edit and then select the Preferences tab. In the "Checks and Vouchers" section, place a check in "3. Enable Check Print Preview" and c